keronfour.blogg.se - Epoxy paint 2 part

EPOXY PAINT 2 PART FREE
EPOXY PAINT 2 PART CRACK

The second coat should be applied within 5 days of the first coat.

Virtually odourless - can be applied in confined areas.

Are you painting a warehouse floor? floorsaver Epoxy Floor Paint is the ideal warehouse floor paint because it is tough enough to stand up to heavy foot and vehicle traffic.

Are you painting a garage floor? floorsaver Epoxy Floor Paint is perfect for concrete garage floors - it stands up to hot-tyre pick up, and r esists automotive fluids and chemicals that would ruin ordinary paint.

Wash equipment in warm soapy water before it dries, but it's probably more practical to just throw the rollers away.

Use a brush around the edges and a medium pile roller for the floor.

Now it's mixed you've got 2 hours to use it before it becomes unusable.

If you use an electric paint mixer, also scrape around the sides and bottom of the tin to make sure it's all mixed in.

Give a good stir with something wide, like a wooden batten or a paint stirrer.

Stir the contents of the large tin, then add the contents of the small resin tin.

For both the 2.5 and 5L pack sizes there is a large tin of coloured curing agent and a smaller tin of resin.

However, don't put it onto floors where there is rising damp.

If the floor is still damp as a result of cleaning, it's not a problem since this is a water based epoxy.

Apply at a minimum temperature of 15 ℃.

floorsaver Mouldable Filler can be used if you want a curved edge, such as a stair nosing, etc. Use floorsaver Pourable Concrete Filler for holes 5mm-50mm deep.

EPOXY PAINT 2 PART CRACK

Fill small surface holes and cracks using floorsaver Crack & Hole Filler.New concrete should be at least 2 months old and always washed with floorsaver Floor Etcher to reduce alkalinity and to remove any weak, loose cement deposits.Lightly sand glossy paint to dull down the shine and roughen it up. For greasy or previously painted floors, clean with floorsaver Cleaner & Degreaser, scraping off any loose paint, dust or dirt.On bare, reasonably clean concrete wash with floorsaver Floor Etcher.Universal Concrete Primer for better adhesion.Epoxy Floor Paint Anti Slip for a slip resistant finish.Cleaner & Degreaser for oily and dusty floors.We recommend two coats, but if you're painting over an existing paint in a similar colour, one coat should be enough.įor more info, watch our YouTube video: Why Buy Floorsaver Epoxy Floor Paint.

It can be applied to bare concrete, wood, sand and cement screeds as well as existing well bonded paint.

EPOXY PAINT 2 PART FREE

Safe and easy to use, virtually solvent free (extremely low VOC) for hygienic areas. The right choice for garage floors as it'll stand up to hot tyres and resist automotive fluids and chemicals that ruin ordinary paint. Stands up to the wear and tear of an industrial environment, including forklift truck areas, or areas where vehicles are used and parked. Use floorsaver Epoxy Floor Paint where an ordinary single pack paint won't do. Just the job for sealing, protecting and dust-proofing concrete floors, floorsaver two part epoxy floor paint gives concrete floors in factories, production areas, garages and warehouses a tough, long lasting hygienic and easy to clean finish. (These are mixed together to make 5L of paint)